Full vial shown · package appearance may vary by batch24/7 Customer Support
Lab tested for purity & quality
Ships from Canada within 24 hours
At Puffin Peptides, our research peptides are sourced from Canada’s largest premium peptide manufacturer, then packaged and shipped here in Canada. Keeping production close to home gives us greater oversight of quality, consistency, packaging, and every batch that leaves our facility.
Working with an established Canadian manufacturer gives us clearer control from sourcing through fulfilment. The result is a more transparent, dependable source for high-quality research peptides, backed by batch documentation and responsive local support.
From sourcing to delivery, our focus is simple: premium Canadian research products, reliable service, and a standard of quality researchers can trust.
Built for the comeback, Wolverine combines BPC-157 and TB-500 in a recovery-focused blend designed to support tissue repair, mobility, and physical resilience. It is commonly explored for helping muscles, tendons, and ligaments recover from intense training, strain, or injury—so the body can rebuild, move better, and return stronger.
WOLVERINE is supplied as 10 mg + 10 mg of lyophilized powder in a sealed glass vial for laboratory research. Confirm the selected vial and batch details before use.
Most vials are prepared using 2 mL bacteriostatic water unless otherwise noted.
Slowly add the water down the inside wall of the vial and gently swirl until dissolved.
Need to calculate concentrations?Open the Peptide CalculatorStore unprepared vials in a cool, dry place away from heat and moisture.
Refrigerate prepared vials between 2–8°C.
Avoid repeated freeze-thaw cycles.
Explore the science, research focus, and key information behind this compound.
WOLVERINE is supplied as a research-use product for controlled laboratory applications. A focused formulation for controlled cellular and tissue-response studies.
Researchers may measure tissue-response signalling against a vehicle or untreated control in a model suited to the question. They may also compare cellular migration with a relevant reference compound while keeping formulation and exposure consistent. They may also use matrix-related research to frame a specific endpoint rather than making a broad benefit claim.
A focused formulation for controlled cellular and tissue-response studies. The exact mechanism and meaning of a result still depend on the model, formulation, exposure, controls, and endpoint used in the study. WOLVERINE is listed here as laboratory research material. A catalogue listing does not imply approval as a medicine, establish safety or efficacy in people, or make this vial equivalent to a named pharmaceutical product.
Start with the research model—not the marketing claim. Published work involving WOLVERINE may range from biochemical and cell studies to animal or human research. Those evidence levels answer different questions and should not be presented as interchangeable. Controls make the result readable. A useful WOLVERINE experiment states the model, selected endpoint, exposure, comparator, and exact material identity before interpreting a response. Association is not an established human benefit. A pathway signal, cell response, or animal outcome can support another research question. It does not by itself establish safety, effectiveness, or an appropriate use in people.
This product is offered for laboratory research only. It is not for human consumption and is not represented as a medicine, treatment, supplement or substitute for an approved product.
Plan the concentration and measurement volume before adding water, then follow the preparation and storage steps.
Confirm the vial strength and planned water volume before adding water.
WOLVERINE · 10 mg + 10 mg selected
Enter the verified amount shown on the vial label.
For laboratory calculation only. Confirm the vial label and research protocol before preparation.
Most lyophilized vials are prepared with 2 mL of bacteriostatic water, unless otherwise stated on the product page or vial label.
After confirming the calculation, slowly add the planned water volume down the inside wall of the vial.
Do not shake the vialLyophilized peptides can be sensitive to vigorous agitation. Gently swirl until fully dissolved.
Prepared vialsRefrigerate at 2–8°C
Unprepared vialsKeep cool and dry, away from heat, moisture, and direct sunlight
More than 10,000 products have been shipped and delivered across Canada. In-stock orders are checked and packed within 24 hours, then shipped with Canada Post. Tracking is sent after the parcel's first carrier scan.
10 sample reviews
Reviews are checked before publication. Your email is never displayed.
BPC-157 arrived clean and well protected. The 10 mg label was easy to read, and I found the batch details without having to hunt for them.
Quick update on the Tirzepatide: ordering was simple, tracking appeared after the first scan, and everything in the mailer looked tidy.
This was my first time ordering Semaglutide. The strength options were clear and the storage notes were right where I expected them to be.
Short and sweet—Retatrutide was well packed, clearly labelled and exactly as listed.
I took a minute to compare the TB-500 options before choosing 10 mg. The page made that easy, and the parcel arrived in good condition.
Product, documentation, shipping and support answers—without making you hunt through the site.
Yes. Puffin Peptides sources its research peptides from Canada’s largest premium peptide manufacturer, then labels, packages, and ships them from Canada. Product and batch information remains tied to each vial.
No. All Puffin Peptides products are supplied strictly for laboratory research and analytical use. They are not for human or veterinary consumption and are not represented as medicines, treatments, supplements, or substitutes for approved products.
Yes. Batch-specific documentation is published for the applicable product strength and lot when available. Open Batch details on the product page; if a document has not yet been published, contact support with the product name, strength, and lot number.
A lyophilized peptide is a peptide that has been freeze-dried into a powder by removing water under controlled low-temperature and vacuum conditions. This format supports stability during storage and allows the material to be prepared according to the product label and research protocol.
Always follow the storage instructions for the exact product and lot. Unless otherwise stated, keep unprepared lyophilized vials cool and dry, away from heat, moisture, and direct sunlight. Refrigerate prepared vials at 2–8°C and avoid repeated freeze-thaw cycles.
No. The correct diluent, volume, and preparation method can vary by product. Most Puffin lyophilized vials use 2 mL of bacteriostatic water unless the product page or vial label says otherwise. Add liquid slowly down the inside wall, gently swirl, and never shake the vial.
Select the vial strength, enter the planned water volume, and add a target amount if you want a measurement-volume result. The calculator displays the resulting concentration and measurement for laboratory planning only. Confirm the vial label and research protocol before preparation.
Puffin Peptides accepts Visa, Mastercard, Interac, and Visa Debit. Available payment methods are shown at checkout before payment is submitted. Puffin Peptides does not collect payment details by email or through customer-support messages.
Payment is handled through the secure payment provider displayed at checkout. Puffin Peptides does not store complete payment-card details and will never ask you to send them by email or through a support message.
Yes. Product prices, order subtotals, discounts, and free-shipping thresholds are shown in Canadian dollars. Applicable taxes and any delivery charges appear in the order summary before completion.
In-stock orders are checked, protected, and packed within 24 hours, then shipped across Canada with Canada Post. Product-specific handling requirements are followed during fulfilment.
Yes. Canada Post tracking is provided after the parcel receives its first carrier scan. Use the tracking link in the shipping section or the link provided with your order to follow the parcel to delivery.
In-stock orders are picked, packed, and shipped within 24 hours. Delivery time varies by destination, Canada Post service, weather, and other carrier conditions; the tracking page provides the most current delivery estimate after the first scan.
Yes. Standard tracked Canada Post delivery is complimentary when the discounted order subtotal reaches $250 CAD before tax. Any remote-area surcharge or service exclusion is shown before order completion.
Because research products require controlled handling, return eligibility depends on the item and whether it can safely re-enter inventory. Contact support within 48 hours for an incorrect, incomplete, or damaged order. Confirmed issues are reviewed for replacement, store credit, or refund.
Contact support within 48 hours of delivery with your order number and clear photos of the shipping parcel, packaging, and affected vial. Keep all packaging until the review is complete. Verified transit damage is assessed for replacement, store credit, or refund.
Contact support as soon as possible. An order can be changed or cancelled only before packing and fulfilment begin, so requests cannot be guaranteed once the order is being prepared or has shipped.
Puffin combines premium Canadian sourcing with clear vial strengths, batch-specific documentation, transparent CAD pricing, preparation and storage guidance, and responsive Canadian support. More than 10,000 products have been shipped and delivered across Canada.
Email support@puffinpeptides.ca at any time. The support team responds Monday through Friday, 9:00–17:00 Pacific Time. Include the product name, catalogue code, lot number, or order number when available so the team can help quickly.
Products in the same research area, each with its own pathway, evidence level and selectable strengths.
